The store will not work correctly when cookies are disabled.
Join the Aqua Science Insiders Club
41 years of Expertise in Engineered Water Treatment and Well SystemsPrice Match GuaranteeLifetime WarrantyThe Largest Selection of Residential Filtration SystemsWell Water Components and SuppliesReplaceable FiltersComplete Water TestingIndustry’s Best BrandsExcellent Tech SupportWater Treatment ChemicalsCustom solutions designed to address your specific needsMost products ship the same day
Birm®: The Ultimate Solution for Iron & Manganese Removal
Birm® is a highly efficient and cost-effective filtration media designed to remove dissolved iron and manganese from water supplies. Whether you are dealing with unpleasant water discoloration, metallic taste, or damage to plumbing fixtures, Birm® provides a reliable and sustainable solution.
Why Choose Birm®?
Key Benefits
Exceptional Filtration Efficiency: Enhances oxidation of iron and manganese, delivering crystal-clear water.
Cost-Effective: No need for chemical regeneration, reducing operational costs.
Eco-Friendly: Operates without chemicals, ensuring sustainability.
Low Maintenance: Requires only periodic backwashing.
Versatile Application: Suitable for residential, commercial, and industrial systems.
Lightweight Design: Easier installation and efficient performance.
How Does Birm® Work?
Birm® acts as an insoluble catalyst to enhance the reaction between dissolved oxygen and soluble iron or manganese compounds. This process precipitates contaminants into easily filtered particles, ensuring clean, safe water.
Limitations of Birm®
To achieve optimal results, ensure the following:
Water pH is at least 6.8 for iron removal and between 8.0–9.0 for manganese removal.
Avoid water containing oil, hydrogen sulfide, or excessive organic matter.
Chlorination levels must remain minimal.
Note: Birm® works best when dissolved oxygen levels are sufficient and contaminants do not exceed recommended levels.
Applications
Residential well water systems
Municipal water treatment plants
Industrial water filtration
Disclaimer: Due to FedEx limitations, orders must be less than 150 lbs. You may place multiple orders, and they will be combined before shipping.
This Birm iron filter system uses granular Birm media for removal of dissolved iron and manganese from raw water supplies. The system includes a Fleck 2510SXT digital control valve, 1 inch stainless steel by-pass, 1 cu. ft. of Birm, 1 sleeve of gravel, and a funnel and cap. Birm acts as an insoluble catalyst to enhance the reaction between dissolved oxygen and iron compounds, and it is cleaned by periodic backwashing without chemical regeneration.
It is designed to remove dissolved iron and manganese from raw water supplies.
What valve is included with the system?
The system includes a Fleck 2510SXT digital control valve.
What components are included?
Included are the Fleck 2510SXT digital control valve, 1 inch stainless steel by-pass, 1 cu. ft. of Birm, 1 sleeve of gravel, and a funnel and cap.
Does Birm require chemical regeneration?
No. Birm does not require chemicals for regeneration.
How is the media cleaned?
The media is cleaned by periodic backwashing.
What water conditions are stated for iron removal?
The water should contain no oil or hydrogen sulfide, organic matter should not exceed 4-5 ppm, dissolved oxygen should equal at least 15% of the iron content, and pH should be 6.8 or more.
What pH is stated for maximum efficiency?
The description states Birm works at maximum efficiency with pH levels of 7.2 or greater.
Can Birm be used in different water treatment system types?
Yes. It may be used in either gravity fed or pressurized water treatment systems.
This Birm iron filter system is set up as a water treatment unit with a Fleck 2510SXT digital control valve and included bypass.
Verify the source water meets the stated Birm requirements, including pH of 6.8 or more, no oil or hydrogen sulfide, organic matter not exceeding 4-5 ppm, and dissolved oxygen equal to at least 15% of the iron content.
Install the system in a location that allows for periodic backwashing.
Connect the Fleck 2510SXT control valve and the included 1 inch stainless steel by-pass.
Confirm the included Birm media and gravel are installed as supplied with the system.
Program the control valve for normal service and backwashing based on the valve instructions.
Validate your login
Birm Iron Filter System & Fleck 2510SXT AIO Digital Control Valve
Validate your login