GreensandPlus Filter System & Fleck 5600SXT AIO Digital Control Valve

GreensandPlus Filter System & Fleck 5600SXT AIO Digital Control Valve

GreensandPlus Filter System & Aqua Science AIO Digital Control Valve

System Lifetime Warranty
CLICK HERE TO CONFIRM THE PRICE
MSRP $1,612.00
Sale Price $806.00
50% OFF Factory Direct Saving
SKU#
MGSPAS89OCS
In stock
Free Shipping
Only %1 left
MGSPAS89AIO

Helps to Remove
Iron, Manganese, Hydrogen Sulfide, Arsenic and Radium

Features and Benefits

• The manganese dioxide-coated surface of GreensandPlus acts as a catalyst in the oxidation-reduction reaction of iron and manganese.
• The silica sand core of GreensandPlus allows it to withstand waters that are low in silica, TDS, and hardness without breakdown.
•Effective at higher operating temperatures and higher differential pressures than standard manganese greensand.
•GreensandPlus is an exact replacement for manganese greensand.
•GreensandPlus has the WQA Gold Seal Certification for compliance with NSF/ANSI 61

Oxygen Chamber System  (AIO) technology uses natural oxidation to remove Iron from the water supply, without chemicals, without aerators and without air compressors.

This system includes:

Aqua ScienceDigital Control Valve
1" by-pass
1.5 Cu. ft of Manganese Greensand Plus
1 Sleeve of gravel
Funnel and Cap 

Iron and Manganese Removal
GreensandPlus™ has a manganese dioxide coating which creates a highly oxidative environment.  When a strong oxidant is injected in the raw water stream ahead of a GreensandPlus™ filter, soluble iron and manganese are easily oxidized and the precipitates are trapped by the media (which acts as a catalyst and does not participate in the reaction). The filter is subsequently backwashed and reused, therefore it is not sacrificed in this process.

Hydrogen Sulfide Removal
GreensandPlus™ directly oxidizes sulfide and catalyzes the oxidation reaction. Increased run length and service life of GreensandPlus™ may be realized by pre-feeding a solution of chlorine-containing compounds.

Arsenic Removal
GreensandPlus™ can be used to remove arsenic from groundwater in the presence of iron. Chlorine must be pre-injected to oxidize the iron convert arsenite to arsenate and keep the media regenerated.

Arsenic combines with oxidized iron and is filtered out in the media. If there is not a sufficient amount of iron present in the raw water, then an iron salt such as ferric chloride can be pre‑injected.

A general guideline is 1 mg/L of iron to remove 20 µg/L of arsenic. This can vary greatly depending on pH, silica, and other competing ions in the water.

Radium Removal
GreensandPlus™ can be used to remove radium from ground water in the presence of manganese, in a similar manner to arsenic removal. In the case of radium, manganese in the raw water is necessary.

If there is not a sufficient amount of manganese present, then manganese sources such as manganous sulfate can be pre‑injected.

More Information
MaterialManganese Greensand Plus
Control ValveAS89
Model #MGSPAS89AIO
ManufacturerAqua Science
Shipping Weight150
Write Your Own Review
You're reviewing:GreensandPlus Filter System & Aqua Science AIO Digital Control Valve
Your Rating
What contaminants does the GreensandPlus Filter System remove?
It removes iron, manganese, hydrogen sulfide, arsenic, and radium from water.
How does the Oxygen Chamber System (AIO) work?
It uses natural oxidation to remove iron without chemicals, aerators, or air compressors.
Is the GreensandPlus media reusable?
Yes, the media is backwashed and reused, not sacrificed in the process.
What is required for arsenic removal?
Chlorine must be pre-injected to oxidize iron, converting arsenite to arsenate for effective arsenic removal.
Can the system handle high temperatures and pressures?
Yes, GreensandPlus is effective at higher operating temperatures and pressures than standard manganese greensand.
Does the system require a control box?
No, the system does not require a control box.
What is the replacement time for the system?
The recommended replacement time is 24 months.

Installation Brief

Professional installation is recommended for the GreensandPlus Filter System to ensure optimal performance and safety.

  1. Connect the system to the main water supply.
  2. Ensure proper setup of the Aqua Science AIO Digital Control Valve.
  3. Backwash the system as per the manual to prepare the media.
Important:
  • Ensure all connections are secure to prevent leaks.
  • Follow all local plumbing codes and regulations.
  • Handle all components with care to avoid damage.
GreensandPlus Filter System & Aqua Science AIO Digital Control ValveGreensandPlus Filter System & Aqua Science AIO Digital Control Valve