Trojan UV Quartz Sleeve for UVMAX-28E,  PRO 7 or UVMAX-E4

Trojan UV Quartz Sleeve for UVMAX-28E, PRO 7 or UVMAX-E4

Birm/Filter AG Plus Iron Filter with 12" X 52" Tank & Fleck 2510SXT AIO Oxygen Chamber System Digital Control Valve

$1,210.00

Helps to Remove
Iron and Manganese

Advantages
•Under the proper conditions, no chemicals are to be purchased for maintenance. Regeneration is not required.
•Iron removal efficiency is extremely high.
•Negligible labor cost: only periodic backwashing is required.
•Durable material with a long life and wide temperature range.
•Weighs only 36-38 lbs./cu.

*Shipping Included*
Availability:In stock
SKU
BIRM/FILTERAGPLUS2510OCS12x52

Birm is a Granular filter media used for the removal of Iron and Manganese.

Oxygen Chamber System technology uses natural oxidation to remove Iron from the water supply, without chemicals, without aerators and without air compressors.

This system includes:

Fleck 2510SXT AIO Digital Control valve
12x52 Fiberglass Mineral Tank
1" stainless steel by-pass
1.5Cu. ft of Birm
.5 Filter AG Plus 
1 Sleeve of gravel
1.05" Riser Tube
Funnel and Cap 
 

Birm is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity fed or pressurized water treatment systems. Birm acts as an insoluble catalyst to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds. In ground waters the dissolved iron is usually in the ferrous bicarbonate state due to the excess of free carbon dioxide and is not filterable. Birm, acting as a catalyst between the oxygen and the soluble iron compounds, enhances the oxidation reaction of Fe++ to Fe+++ and produces ferric hydroxide which precipitates and may be easily filtered. The physical characteristics of Birm provide an excellent filter media which is easily cleaned by backwashing to remove the precipitant. Birm is not consumed in the iron removal operation and therefore offers a tremendous economic advantage over many other iron removal methods.

Other advantages of Birm include; long material life with relatively low attrition loss, a wide temperature performance range and extremely high removal efficiency. Negligible labor costs are involved because Birm does not require chemicals for regeneration, only periodic backwashing is required.

When using Birm for iron removal, it is necessary that the water: contain no oil or hydrogen sulfide, organic matter not to exceed 4-5 ppm, the D.O. content equal at least 15% of the iron content with a pH of 6.8 or more. If the influent water has a pH of less that 6.8, neutralizing additives such as Clack Corosex®, Calcite or soda ash may be used prior to the Birm filter to raise the pH. Water having a low D.O. level may be pretreated by aeration.

More Information
Model #BIRM/Filter AG Plus 2510OCS12x52
ManufacturerFleck
Shipping Weight150
Flow Rate0
Size12" X 52"
Control Valve2510SXT Digital OCS
WarrantyLifetime Mineral Tank Warranty, and 1 Year Control Valve Parts
pdf
(Size: 5.82 MB)
pdf
(Size: 0.42 MB)