41 years of Expertise in Engineered Water Treatment and Well Systems
Price Match Guarantee
Lifetime Warranty
The Largest Selection of Residential Filtration Systems
Well Water Components and Supplies
Replaceable Filters
Complete Water Testing
Industry’s Best Brands
Excellent Tech Support
Water Treatment Chemicals
Custom solutions designed to address your specific needs
Most products ship the same day
Toggle Nav 
Goulds 5GS10422C, 5GPM, 1HP, 230V, 2 Wire, 4" Stainless Steel Submersible Well Pump
SKU#
5GS10422C
In stock
- Manufacturer: Goulds
- Categories: Goulds Submersible 4" Well Pumps - GS Stainless Steel Series, 5 GPM, Stainless Steel, Submersible Well Pumps from Goulds, Grundfos, & Shakti
- Model #: 5GS10422C
- Motor Horsepower: 1 HP
- Phase: 1
- Amps: 6.7
- Flow Rate: 5 GPM
- Material: Stainless Steel
- Wire Count: 2 Wire
- Diameter: 4 inch
- Shipping Weight: 38 lbs
- Universal Product Code: 69766645124
- Volts: 230V
Features
- Powered for Continuous Operation: Operates continuously without damage to the motor.
- Field Serviceable: Easily serviceable with common tools and repair parts.
- Sand Handling Design: Superior sand handling with durable pump design.
- FDA Compliant Non-Metallic Parts: Corrosion-resistant and non-toxic components.
- Discharge Head/Check Valve: Built with cast 303 stainless steel for strength and durability.
- Motor Adapter: Ensures rigid, accurate alignment of pump and motor.
- Stainless Steel Casing: Strong and corrosion-resistant polished stainless steel.
- Hex Shaft Design: Ensures positive impeller drive.
- Engineered Polymer Bearings: Strong and resistant to abrasion and wear.
Important: A high static water level may cause the pump to operate outside its recommended range. Use a "Dole" flow restriction valve to throttle the pump and prevent upthrust damage.
Electrical Wire Gauge Required
| Copper Wire Size | 12 Gauge | 10 Gauge | 8 Gauge | 6 Gauge | 4 Gauge | 2 Gauge |
|---|---|---|---|---|---|---|
| Distance from service entrance to motor | 430 ft. | 686 ft. | 1087 ft. | 1692 ft. | 2697 ft. | 4281 ft. |
Goulds 5GS10422C is a 4 inch stainless steel submersible well pump rated for 5 GPM with a 1 HP, 230V, 2-wire motor. It is designed for continuous operation and does not require a control box. The GS Series design includes a floating impeller stack for sand handling, a built-in check valve, and corrosion-resistant stainless steel construction.
| Phase | 1 |
|---|---|
| Voltage | 230v |
| Wire Count | 2 Wire |
| Motor Horsepower | 1 |
| Flow Rate | 5 |
| Stages | 20 |
| Material | Stainless Steel |
| Diameter | 4 inch Diameter |
| Source | https://www.xylem.com/ |
| Model # | 5GS10422C |
| Manufacturer | Goulds |
| Shipping Weight | 38 |
Write Your Own Review
What are the basic specifications of the Goulds 5GS10422C?
This pump is rated for 5 GPM and uses a 1 HP, 230V, single-phase, 2-wire motor.
What size pump is this?
It is a 4 inch diameter submersible well pump.
Does this pump require a control box?
No. The product data states that a control box is not required.
Can this pump run continuously?
Yes. Goulds states the pump is powered for continuous operation within the motor manufacturer's working limits.
How does this pump handle sand?
It uses a face clearance, floating impeller stack design described as a durable sand handling design.
What materials are used in the pump construction?
It has a polished stainless steel casing, cast 303 stainless steel components, and glass-filled engineered composite non-metallic parts.
Does the motor include built-in protection?
Yes. The CentriPro motor features built-in lightning and surge protection.
What wire configuration does this pump use?
This model uses a 2-wire configuration.
Installation Brief
This 4 inch submersible well pump should be installed with attention to the pump's 230V, 2-wire electrical requirements and proper operating range.
- Confirm the pump model and motor specifications match the application, including 230V, single-phase, and 2-wire configuration.
- Install the pump assembly in line with the system design and complete the pump connections.
- Use the cast-in safety line loops provided on the discharge head during installation.
- Complete electrical connections according to the product's motor requirements and applicable codes.
- If the well has a high static water level, restrict maximum flow to keep the pump within its recommended operating range.
- After setup, start the pump and verify normal operation.
Check items to add to the cart.
Validate your login