Skip to the beginning of the images gallery

Goulds 5GS05412CL, 5GPM, 1/2HP, 230V, 3 Wire, 4" Stainless Steel Submersible Well Pump

Be the first to review this product

CLICK HERE TO CONFIRM THE PRICE

SKU#

5GS05412CL

In stock

Performance Chart

Model 5GS

Horsepower range ½ - 2, Recommended Range 1.2 - 7.5 GPM, 60Hz, 3450 RPM

Pump Model	HP	PSI	Depth to Water in Feet/Ratings in GPM (Gallons per Minute)
Pump Model	HP	PSI	20	40	60	80	100	120	140	160	180	200	220	240	260	280	300	340	380	420	460	500	540	580	620	660	700	740	780	820	860	900	940	980	1020
5GS05R	1/2	0					7.5	7.2	6.8	6.3	5.8	5.2	4.7	3.8	2.9
		20			7.4	7.1	6.7	6.2	5.7	5.1	4.4	3.7	2.6
		30		7.3	6.9	6.6	6.0	5.6	5.0	4.3	3.4	2.3
		40	7.3	6.9	6.5	6.0	5.5	4.9	4.2	3.4	2.2
		50	6.9	6.5	5.9	5.4	4.9	4.1	3.2	2.0
		60	6.2	5.6	5.2	4.6	3.8	2.7	1.2
Shut-off PSI			120	112	103	94	86	77	68	60	51	42	34	25	16
5GS05	1/2	0							7.4	7.2	6.9	6.6	6.3	5.9	5.4	5.0	4.5	3.4
		20					7.4	7.2	6.9	6.5	6.1	5.7	5.3	4.9	4.4	3.8	3.2	1.3
		30			7.7	7.4	7.1	6.8	6.4	6.0	5.6	5.2	4.8	4.3	3.7	3.1	2.2
		40			7.4	7.1	6.7	6.4	6.0	5.6	5.2	4.7	4.2	3.6	3.0	2.2
		50	7.6	7.3	7.0	6.7	6.3	6.0	5.5	5.1	4.6	4.1	3.5	2.9	2.0
		60	7.0	6.7	6.5	6.2	5.8	5.4	5.0	4.6	4.0	3.4	2.6	1.2
Shut-off PSI			166	156	147	139	130	121	113	104	95	87	78	69	61	52	43	26
5GS07	3/4	0									7.5	7.3	7.1	6.9	6.7	6.4	6.1	5.6	5.0	4.2	3.3	2.0
		20							7.5	7.3	7.1	6.8	6.6	6.4	6.1	5.8	5.5	4.8	4.1	3.1	1.8
		30					7.6	7.4	7.2	7.0	6.8	6.5	6.3	6.0	5.7	5.4	5.1	4.4	3.5	2.2
		40				7.6	7.4	7.2	7.0	6.8	6.5	6.3	6.0	5.7	5.4	5.1	4.7	3.9	2.9	1.6
		50			7.6	7.4	7.2	6.9	6.7	6.5	6.2	6.0	5.7	5.3	5.0	4.7	4.3	3.4	2.2
		60	7.5	7.3	7.1	6.9	6.8	6.5	6.3	6.1	5.8	5.5	5.2	4.9	4.5	4.1	3.7	2.6	1.2
Shut-off PSI			255	216	208	199	190	182	173	166	156	147	139	130	121	113	104	87	69	52	35	17
5GS10	1	0											7.6	7.5	7.3	7.1	6.9	6.6	6.1	5.7	5.2	4.6	3.9	3.1	2.1
		20										7.4	7.3	7.1	6.9	6.7	6.5	6.0	5.6	5.1	4.5	3.8	3.0	2.0
		30									7.4	7.2	7.1	6.9	6.6	6.4	6.2	5.8	5.3	4.7	4.1	3.3	2.4
		40								7.4	7.2	7.0	6.8	6.6	6.4	6.2	6.0	5.5	5.0	4.4	3.7	2.9	1.8
		50						7.5	7.4	7.2	7.0	6.8	6.6	6.4	6.2	6.0	5.7	5.2	4.6	4.0	3.2	2.2
		60				7.5	7.4	7.2	7.0	6.9	6.7	6.5	6.4	6.2	6.0	5.7	5.5	5.0	4.4	3.6	2.7	1.2
Shut-off PSI						253	245	234	227	219	210	201	193	184	175	167	158	141	123	106	89	71	54	37	19
5GS15	1½	0													7.5	7.3	7.2	6.9	6.7	6.5	6.2	5.9	5.5	5.1	4.7	4.3	3.8	3.3	2.6	1.7
		20											7.4	7.3	7.1	7.0	6.9	6.7	6.4	6.1	5.8	5.4	5.1	4.7	4.2	3.7	3.2	2.5
		30										7.4	7.2	7.1	7.0	6.9	6.8	6.5	6.3	6.0	5.6	5.2	4.8	4.4	4.0	3.4	2.8	2.0
		40								7.5	7.4	7.2	7.1	7.0	6.9	6.8	6.7	6.4	6.1	5.8	5.4	5.0	4.6	4.2	3.7	3.1	2.4	1.4
		50							7.5	7.3	7.2	7.1	7.0	6.9	6.8	6.6	6.5	6.5	5.9	5.5	5.2	4.8	4.3	3.9	3.4	2.7	1.8
		60						7.5	7.3	7.2	7.1	7.0	6.8	6.7	6.6	6.5	6.3	6.0	5.7	5.3	4.9	4.5	4.1	3.6	3.0	2.2	1.2
Shut-off PSI								325	317	308	299	291	282	273	265	256	247	230	213	195	178	161	143	126	109	91	74	57	39	22
5GS20	2	0																			7.6	7.3	7.0	6.7	6.4	6.1	5.7	5.4	4.9	4.6	4.1	3.6	3.1	2.5	1.9
		20																		7.5	7.2	7.0	6.7	6.3	6.0	5.7	5.3	4.9	4.5	4.0	3.6	3.0	2.4	1.7
		30																	7.6	7.4	7.1	6.8	6.5	6.1	5.8	5.5	5.1	4.7	4.2	3.8	3.3	2.7	2.1	1.2
		40																	7.5	7.2	6.9	6.6	6.3	6.0	5.6	5.2	4.8	4.5	4.0	3.5	3.0	2.3	1.6
		50																7.6	7.3	7.0	6.7	6.4	6.1	5.8	5.4	5.0	4.6	4.2	3.7	3.2	2.6	1.9
		60																7.4	7.2	6.9	6.6	6.2	5.9	5.5	5.2	4.8	4.4	3.9	3.4	2.9	2.2	1.5
Shut-off PSI																		322	305	288	270	253	236	219	201	184	167	149	132	115	97	80	63	45	28

5GS05412CL

Goulds 5GS05412CL Submersible Well Pump

Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.

Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts.

Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 40 years as a superior sand handling, durable pump design.

FDA Compliant Non-Metallic Parts: Impellers, diffusers, and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic.

Discharge Head/Check Valve: Cast 303 stainless steel for strength and durability. Two cast-in safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation.

Motor Adapter: Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench.

Stainless Steel Casing: Polished stainless steel is strong and corrosion resistant.

Hex Shaft Design: Six sided shafts for positive impeller drive.

Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl® bearing spider for excellent abrasion resistance.

Important: Any well with a high static water level may allow the pump to operate off the curve and outside its recommended range. We recommend using a "Dole" flow restriction valve to throttle the pump to prevent upthrust damage to the pump and motor. The maximum flow must be restricted to within the pumps recommended operating range.

Electrical Wire Gauge Required for a 0.5 HP, 3 Wire, 230V, 1 Phase Motor

Copper Wire Size	12 Gauge	10 Gauge	8 Gauge	6 Gauge	4 Gauge	2 Gauge
Distance from service entrance to motor	571 ft.	912 ft.	1444 ft.	2246 ft.	3581 ft.	4685 ft.

Overview

The Goulds 5GS05412CL is a 4 inch stainless steel submersible well pump rated for 5 GPM, 1/2 HP, 230V, and 3-wire operation. It is built for continuous operation and features a floating impeller stack for sand handling, a polished stainless steel casing, and cast 303 stainless steel discharge head and motor adapter components. FDA-compliant non-metallic parts and engineered polymer bearings support corrosion resistance and abrasion resistance.

Specifications

More Information
Phase	1
Voltage	230v
Wire Count	3 Wire
Motor Horsepower	0.5
Flow Rate	5
Stages	12
Discharge Connection	1.25
Material	Stainless Steel
Diameter	4 inch Diameter
Source	https://www.xylem.com/
Model #	5GS05412CL
Manufacturer	Goulds
Performance Chart	Goulds Performance Chart 5GS
Shipping Weight	31

Reviews

Write Your Own Review

Performance Chart

Goulds 5GS05412CL, 5GPM, 1/2HP, 230V, 3 Wire, 4" Stainless Steel Submersible Well Pump

Additional Info

Product Literature

CentriPro Single Phase 3-Wire Motors Info

(Size: 0.23 MB)

Goulds GS 4in Submersible Pump Instruction Manual

(Size: 2.16 MB)

Goulds Submersible and Jet Pump Service Guide

(Size: 12.28 MB)

Technical Data and Pump Fundamentals

(Size: 1.14 MB)

FAQs

What are the basic electrical specifications for this pump?

This pump is rated at 1/2 HP, 230V, 1 phase, 3 wire, and 5.5 amps.

What flow rating is this pump designed for?

It is a 5 GPM submersible well pump.

What size well pump is this model?

This model is a 4 inch diameter submersible well pump.

Can this pump run continuously?

Yes. The product information states it is powered for continuous operation within the motor manufacturer's working limits.

How does this pump handle sand?

It uses a face clearance, floating impeller stack design described as a sand handling design.

What materials are used in the pump construction?

It includes a polished stainless steel casing, cast 303 stainless steel discharge head and motor adapter, and FDA-compliant non-metallic composite parts.

Does this pump include a check valve?

Yes. It has a built-in stainless steel check valve with FDA-compliant BUNA rubber.

Does this model require a control box?

The product data lists this model as not requiring a control box.

Installation Tips

Installation Brief

This 4 inch submersible well pump should be installed according to the Goulds GS instruction materials and the motor wiring requirements for this 230V, 3-wire model.

Confirm the pump model matches the application requirements for 5 GPM, 1/2 HP, 230V, and 3-wire operation.
Review the applicable Goulds GS pump and CentriPro motor literature before installation.
Connect the pump using the built-in discharge head and safety line loops as provided on the unit.
Make electrical connections for the 230V, 1-phase, 3-wire motor using wire sizing appropriate for the installation distance.
If the well has a high static water level, restrict maximum flow to keep the pump within its recommended operating range.
After installation, verify the pump operates within its recommended range and check all connections before regular use.