Skip to the beginning of the images gallery

Goulds 10GS07422C, 10GPM, 3/4HP, 230V, 2 Wire, 4" Stainless Steel Submersible Well Pump

Be the first to review this product

CLICK HERE TO CONFIRM THE PRICE

SKU#

10GS07422C

In stock

Performance Chart

Model 10GS

Horsepower range ½ - 3, Recommended Range 3 - 16 GPM, 60Hz, 3450 RPM

Pump Model	HP	PSI	Depth to Water in Feet/Ratings in GPM (Gallons per Minute)
Pump Model	HP	PSI	20	40	60	80	100	120	140	160	180	200	220	240	260	280	300	340	380	420	460	500	540	580	620	660	700	740	780	820
10GS05R	½	0			15.6	14.0	12.4	10.4	6.5
		20	15.4	13.5	11.5	9.2	6.0
		30	13.0	11.1	8.0	4.0
		40	11.0	7.9	3.0
		50	7.0
		60
Shut-off PSI			61	53	44	34	26	18	10
10GS05	1/2	0				16.0	15.3	14.3	12.8	11.3	9.0	6.4
		20		15.9	14.9	13.8	12.5	10.8	8.3	4.8
		30	15.7	14.6	13.5	12.3	10.5	7.8	4.0
		40	14.5	13.4	12.0	10.3	7.5	3.0
		50	13.0	11.5	9.8	7.2
		60	11.3	9.0	6.4
Shut-off PSI			89	81	72	63	55	46	37	29	20	11
10GS07	3/4	0						16.0	15.2	14.3	13.4	12.5	11.5	10.3	9.0	7.0	4.0
		20				15.8	15.0	14.0	13.0	12.3	11.2	10.2	8.5	6.0
		30			15.7	14.8	13.9	12.8	12.0	11.0	9.8	8.2	5.5
		40		15.6	14.7	13.8	12.7	11.9	10.8	9.7	8.1	5.2
		50	15.3	14.4	13.5	12.6	11.6	10.5	9.4	7.5	4.8
		60	14.3	13.4	12.5	11.5	10.3	9.0	7.0	4.0
Shut-off PSI			130	121	113	104	95	87	78	69	61	52	43	35	26	17	9
10GS10	1	0								15.8	15.2	14.5	13.7	12.8	12.0	11.0	10.0	6.7
		20						15.7	14.9	14.3	13.5	12.7	11.7	10.6	9.6	8.1	6.5
		30				16.0	15.6	14.8	14.2	13.3	12.5	11.6	10.4	9.4	7.8	5.5	3.0
		40			16.0	15.5	14.7	14.1	13.2	12.4	11.5	10.3	9.1	5.0	3.0
		50			15.3	14.6	13.9	13.0	12.3	11.3	10.1	8.9	4.3
		60	15.8	15.2	14.5	13.7	12.0	11.0	10.0	8.6	6.7	4.0
Shut-off PSI			158	150	141	132	124	115	106	98	89	81	72	63	55	46	37	20
10GS15	1½	0												15.7	15.3	14.8	14.4	13.3	12.2	10.9	9.3	7.1	3.0
		20									16.0	15.6	15.2	14.7	14.3	13.7	13.2	11.9	10.6	9.0	6.5
		30								15.9	15.5	15.2	14.6	14.2	13.5	13.1	12.6	11.3	9.7	7.6	4.0
		40							15.8	15.5	15.1	14.6	14.2	13.5	13.0	12.5	11.8	10.3	8.8	6.0
		50						15.7	15.4	14.9	14.5	14.0	13.4	12.8	12.3	11.7	11.0	9.4	7.4	3.4
		60					15.7	15.3	14.8	14.4	13.9	13.3	12.8	12.2	11.6	10.9	10.1	8.1	5.6
Shut-off PSI							197	188	180	171	162	154	144	136	128	119	110	93	76	58	41	24	6
10GS20	2	0														16.0	15.7	14.9	14.2	13.4	12.4	11.4	10.0	8.2	5.8
		20												15.9	15.5	15.3	14.8	14.1	13.2	12.2	11.0	9.9	8.0	5.2
		30											15.8	15.4	15.1	14.7	14.4	13.5	12.7	11.7	10.3	8.8	6.5
		40										15.8	15.4	15.1	14.7	14.7	14.4	12.9	12.2	10.9	9.5	7.8	3.9
		50								16.1	15.7	15.3	15.0	14.6	14.2	14.0	13.4	12.5	11.5	10.1	8.5	6.0
		60							16.0	15.7	15.3	14.9	14.5	14.2	13.8	13.4	12.8	11.8	10.7	9.1	7.2	3.4
Shut-off PSI									225	216	208	199	190	182	173	164	156	139	121	104	87	69	52	35	17
10GS30	3	0																	15.8	15.2	14.6	14.0	13.3	12.6	11.9	11.0	10.0	9.0	7.5	5.8
		20																15.7	15.1	14.5	13.9	13.2	12.5	11.8	10.9	9.9	8.8	7.2	5.4
		30															15.9	15.4	14.8	14.2	13.4	12.8	12.0	11.3	10.3	9.3	8.1	6.2	3.8
		40														15.9	15.6	15.0	14.4	13.8	13.1	12.4	11.5	10.8	9.7	8.6	7.1	4.7
		50												16.0	15.8	15.6	15.3	14.7	14.1	13.3	12.7	11.9	11.0	10.2	9.1	7.8	6.0	3.0
		60											16.0	15.8	15.5	15.2	14.8	14.3	13.7	12.9	12.3	11.4	10.6	9.6	8.3	6.8	4.5
Shut-off PSI													284	275	267	258	249	232	215	197	180	163	145	128	111	94	76	59	42	24

10GS07422C

Goulds 10GS07422C Submersible Well Pump

The Goulds 10GS07422C is a high-performance submersible well pump designed for efficiency and reliability. Featuring a 3/4 horsepower motor, this pump delivers 10 gallons per minute and operates on a 230-volt power supply.

Powered for Continuous Operation:
This pump is designed for continuous operation within the motor's working limits, ensuring durability and long-lasting performance.

Field Serviceable:
Equipped with left hand threads, this unit is easily serviceable with common tools and readily available repair parts.

Sand Handling Design:
The pump features a face clearance, floating impeller stack that has been proven over 40 years for superior sand handling and durability.

FDA Compliant Non-Metallic Parts:
The impellers, diffusers, and bearing spiders are made of glass-filled engineered composites, offering corrosion resistance and non-toxicity.

Discharge Head/Check Valve:
Constructed from cast 303 stainless steel, the discharge head and check valve provide strength and durability. The built-in check valve is made of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation.

Motor Adapter:
The cast 303 stainless steel motor adapter ensures rigid, accurate alignment of the pump and motor, with easy access to motor mounting nuts.

Stainless Steel Casing:
The polished stainless steel casing is strong and corrosion-resistant.

Hex Shaft Design:
The six-sided shaft design ensures a positive impeller drive.

Engineered Polymer Bearings:
The proprietary engineered polymer bearing material is durable and resistant to abrasion and wear.

Important: Any well with a high static water level may allow the pump to operate outside its recommended range. A "Dole" flow restriction valve is recommended to prevent upthrust damage.

Electrical Wire Gauge Required

Copper Wire Size	12 Gauge	10 Gauge	8 Gauge	6 Gauge	4 Gauge	2 Gauge
Distance from service entrance to motor	562 ft.	897 ft.	1420 ft.	2210 ft.	3523 ft.	5594 ft.

Overview

Goulds 10GS07422C is a 4 inch stainless steel submersible well pump rated for 10 GPM with a 3/4 HP, 230V, single-phase, 2-wire motor. This GS Series model is designed for continuous operation and does not require a control box.

Its construction includes a polished stainless steel casing, cast 303 stainless steel discharge head and motor adapter, a built-in check valve, and a floating impeller stack for sand handling. FDA compliant non-metallic impellers, diffusers, and bearing spiders provide corrosion-resistant, non-toxic component construction.

Specifications

More Information
Phase	1
Voltage	230v
Wire Count	2 Wire
Motor Horsepower	0.75
Stages	10
Material	Stainless Steel
Diameter	4 inch Diameter
Source	https://www.xylem.com/
Model #	10GS07422C
Manufacturer	Goulds
Performance Chart	Goulds Performance Chart 10GS
Shipping Weight	39

Reviews

Write Your Own Review

Performance Chart

Goulds 10GS07422C, 10GPM, 3/4HP, 230V, 2 Wire, 4" Stainless Steel Submersible Well Pump

Additional Info

Product Literature

CentriPro Single Phase 2-Wire Motors Info

(Size: 0.22 MB)

Goulds 5-25GS Submersible Pumps Technical Brochure

(Size: 0.38 MB)

Goulds GS 4in Submersible Pump Instruction Manual

(Size: 2.16 MB)

Goulds Submersible and Jet Pump Service Guide

(Size: 12.28 MB)

Technical Data and Pump Fundamentals

(Size: 1.14 MB)

FAQs

What are the basic specifications of the Goulds 10GS07422C?

It is a 10 GPM, 3/4 HP, 230V, single-phase, 2-wire, 4 inch submersible well pump.

Does this pump require a control box?

No. This is a 2-wire model and does not require a control box.

Is this pump designed for continuous operation?

Yes. The product information states it can be operated continuously within the motor manufacturer's working limits.

What material is the pump casing made from?

The casing is polished stainless steel.

How does this pump address sandy well conditions?

It uses a face clearance, floating impeller stack design described as a sand handling design.

Does the pump include a check valve?

Yes. It has a built-in check valve constructed of stainless steel and FDA compliant BUNA rubber.

Is the pump field serviceable?

Yes. The unit has left hand threads and is described as field serviceable with common tools and readily available repair parts.

What wire size is listed for a 3/4 HP 2-wire 230V motor at 562 feet?

The wire guide lists 12 gauge copper wire for distances up to 562 feet from the service entrance to the motor.

Installation Tips

Installation Brief

This 4 inch 2-wire submersible well pump should be installed according to the Goulds GS Series instructions and matched to the listed 230V single-phase power requirements.

Confirm the pump model, 10 GPM rating, 3/4 HP motor, 230V supply, and 2-wire configuration before installation.
Install the pump as a 4 inch submersible well pump and make the discharge connection using the built-in discharge head and check valve assembly.
Use the cast-in safety line loops provided on the discharge head as needed during installation.
Select copper wire size based on the distance from the service entrance to the motor using the supplied wire guide.
If the well has a high static water level, restrict maximum flow to the recommended operating range using a Dole flow restriction valve as noted in the product literature.