Skip to the beginning of the images gallery

Goulds 10GS05411CL, 10GPM, 1/2HP, 115V, 3 Wire, 4" Stainless Steel Submersible Well Pump

Be the first to review this product

CLICK HERE TO CONFIRM THE PRICE

SKU#

10GS05411CL

In stock

Performance Chart

Model 10GS

Horsepower range ½ - 3, Recommended Range 3 - 16 GPM, 60Hz, 3450 RPM

Pump Model	HP	PSI	Depth to Water in Feet/Ratings in GPM (Gallons per Minute)
Pump Model	HP	PSI	20	40	60	80	100	120	140	160	180	200	220	240	260	280	300	340	380	420	460	500	540	580	620	660	700	740	780	820
10GS05R	½	0			15.6	14.0	12.4	10.4	6.5
		20	15.4	13.5	11.5	9.2	6.0
		30	13.0	11.1	8.0	4.0
		40	11.0	7.9	3.0
		50	7.0
		60
Shut-off PSI			61	53	44	34	26	18	10
10GS05	1/2	0				16.0	15.3	14.3	12.8	11.3	9.0	6.4
		20		15.9	14.9	13.8	12.5	10.8	8.3	4.8
		30	15.7	14.6	13.5	12.3	10.5	7.8	4.0
		40	14.5	13.4	12.0	10.3	7.5	3.0
		50	13.0	11.5	9.8	7.2
		60	11.3	9.0	6.4
Shut-off PSI			89	81	72	63	55	46	37	29	20	11
10GS07	3/4	0						16.0	15.2	14.3	13.4	12.5	11.5	10.3	9.0	7.0	4.0
		20				15.8	15.0	14.0	13.0	12.3	11.2	10.2	8.5	6.0
		30			15.7	14.8	13.9	12.8	12.0	11.0	9.8	8.2	5.5
		40		15.6	14.7	13.8	12.7	11.9	10.8	9.7	8.1	5.2
		50	15.3	14.4	13.5	12.6	11.6	10.5	9.4	7.5	4.8
		60	14.3	13.4	12.5	11.5	10.3	9.0	7.0	4.0
Shut-off PSI			130	121	113	104	95	87	78	69	61	52	43	35	26	17	9
10GS10	1	0								15.8	15.2	14.5	13.7	12.8	12.0	11.0	10.0	6.7
		20						15.7	14.9	14.3	13.5	12.7	11.7	10.6	9.6	8.1	6.5
		30				16.0	15.6	14.8	14.2	13.3	12.5	11.6	10.4	9.4	7.8	5.5	3.0
		40			16.0	15.5	14.7	14.1	13.2	12.4	11.5	10.3	9.1	5.0	3.0
		50			15.3	14.6	13.9	13.0	12.3	11.3	10.1	8.9	4.3
		60	15.8	15.2	14.5	13.7	12.0	11.0	10.0	8.6	6.7	4.0
Shut-off PSI			158	150	141	132	124	115	106	98	89	81	72	63	55	46	37	20
10GS15	1½	0												15.7	15.3	14.8	14.4	13.3	12.2	10.9	9.3	7.1	3.0
		20									16.0	15.6	15.2	14.7	14.3	13.7	13.2	11.9	10.6	9.0	6.5
		30								15.9	15.5	15.2	14.6	14.2	13.5	13.1	12.6	11.3	9.7	7.6	4.0
		40							15.8	15.5	15.1	14.6	14.2	13.5	13.0	12.5	11.8	10.3	8.8	6.0
		50						15.7	15.4	14.9	14.5	14.0	13.4	12.8	12.3	11.7	11.0	9.4	7.4	3.4
		60					15.7	15.3	14.8	14.4	13.9	13.3	12.8	12.2	11.6	10.9	10.1	8.1	5.6
Shut-off PSI							197	188	180	171	162	154	144	136	128	119	110	93	76	58	41	24	6
10GS20	2	0														16.0	15.7	14.9	14.2	13.4	12.4	11.4	10.0	8.2	5.8
		20												15.9	15.5	15.3	14.8	14.1	13.2	12.2	11.0	9.9	8.0	5.2
		30											15.8	15.4	15.1	14.7	14.4	13.5	12.7	11.7	10.3	8.8	6.5
		40										15.8	15.4	15.1	14.7	14.7	14.4	12.9	12.2	10.9	9.5	7.8	3.9
		50								16.1	15.7	15.3	15.0	14.6	14.2	14.0	13.4	12.5	11.5	10.1	8.5	6.0
		60							16.0	15.7	15.3	14.9	14.5	14.2	13.8	13.4	12.8	11.8	10.7	9.1	7.2	3.4
Shut-off PSI									225	216	208	199	190	182	173	164	156	139	121	104	87	69	52	35	17
10GS30	3	0																	15.8	15.2	14.6	14.0	13.3	12.6	11.9	11.0	10.0	9.0	7.5	5.8
		20																15.7	15.1	14.5	13.9	13.2	12.5	11.8	10.9	9.9	8.8	7.2	5.4
		30															15.9	15.4	14.8	14.2	13.4	12.8	12.0	11.3	10.3	9.3	8.1	6.2	3.8
		40														15.9	15.6	15.0	14.4	13.8	13.1	12.4	11.5	10.8	9.7	8.6	7.1	4.7
		50												16.0	15.8	15.6	15.3	14.7	14.1	13.3	12.7	11.9	11.0	10.2	9.1	7.8	6.0	3.0
		60											16.0	15.8	15.5	15.2	14.8	14.3	13.7	12.9	12.3	11.4	10.6	9.6	8.3	6.8	4.5
Shut-off PSI													284	275	267	258	249	232	215	197	180	163	145	128	111	94	76	59	42	24

10GS05411CL

Goulds 10GS05411CL Submersible Well Pump

Manufacturer: Goulds

Categories: Goulds Submersible 4" Well Pumps - GS Stainless Steel Series, 10 GPM, Stainless Steel, Submersible Well Pumps from Goulds, Grundfos, & Shakti, Pumps, Tanks & Well Components, Products, Root Catalog

Model #: 10GS05411CL

Motor Horsepower: 0.5

Phase: 1

Amps: 11

Material: Stainless Steel

Wire Count: 3 Wire

Diameter: 4 inch Diameter

Shipping Weight: 33 lbs

Universal Product Code: 697666450357

Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.
Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts.
Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 40 years as a superior sand handling, durable pump design.
FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic.
Discharge Head/Check Valve: Cast 303 stainless steel for strength and durability. Two cast-in safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation.
Motor Adapter: Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench.
Stainless Steel Casing: Polished stainless steel is strong and corrosion resistant.
Hex Shaft Design: Six sided shafts for positive impeller drive.
Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl® bearing spider for excellent abrasion resistance.

Important: Any well with a high static water level may allow the pump to operate off the curve and outside its recommended range. We recommend using a "Dole" flow restriction valve to throttle the pump to prevent upthrust damage to the pump and motor. The maximum flow must be restricted to within the pump's recommended operating range.

Electrical Wire Gauge Required for a 0.5 HP, 3 Wire, 115V, 1 Phase Motor

Copper Wire Size	12 Gauge	10 Gauge	8 Gauge	6 Gauge	4 Gauge	2 Gauge
Distance from service entrance to motor	160 ft.	255 ft.	404 ft.	629 ft.	1002 ft.	1591 ft.

Overview

Goulds 10GS05411CL is a 4 inch stainless steel submersible well pump rated for 10 GPM with a 1/2 HP, 115V, single-phase, 3-wire motor. This GS Series model is designed for continuous operation and combines corrosion-resistant construction with a proven sand handling floating impeller stack.

Construction features include a polished stainless steel casing, cast 303 stainless steel discharge head and motor adapter, a built-in check valve for quiet operation, and engineered polymer bearings for abrasion resistance. FDA compliant non-metallic internal parts are corrosion resistant and non-toxic, and the unit is field serviceable with common tools and readily available repair parts.

Specifications

More Information
Phase	1
Voltage	115v
Wire Count	3 Wire
Motor Horsepower	0.5
Stages	7
Material	Stainless Steel
Diameter	4 inch Diameter
Source	https://www.xylem.com/
Model #	10GS05411CL
Manufacturer	Goulds
Performance Chart	Goulds Performance Chart 10GS
Shipping Weight	33

Reviews

Write Your Own Review

Performance Chart

Goulds 10GS05411CL, 10GPM, 1/2HP, 115V, 3 Wire, 4" Stainless Steel Submersible Well Pump

Additional Info

Product Literature

CentriPro Single Phase 3-Wire Motors Info

(Size: 0.23 MB)

Goulds 5-25GS Submersible Pumps Technical Brochure

(Size: 0.38 MB)

Goulds GS 4in Submersible Pump Instruction Manual

(Size: 2.16 MB)

Goulds Submersible and Jet Pump Service Guide

(Size: 12.28 MB)

Technical Data and Pump Fundamentals

(Size: 1.14 MB)

FAQs

What are the main specifications of the Goulds 10GS05411CL?

This model is rated for 10 GPM and 1/2 HP, and uses 115V, single-phase, 3-wire power.

What size pump is this?

It is a 4 inch diameter submersible well pump.

Is this pump suitable for continuous operation?

Yes. The product information states it can operate continuously within the motor manufacturer's working limits.

What is the casing material?

The pump has a polished stainless steel casing.

How does this pump handle sand?

It uses a face clearance, floating impeller stack design described as a durable sand handling design.

Does the pump have a built-in check valve?

Yes. It includes a built-in stainless steel check valve with FDA compliant BUNA rubber.

Is this pump field serviceable?

Yes. The unit has left-hand threads and is described as field serviceable with common tools and readily available repair parts.

What wire gauge information is provided for this model?

For a 0.5 HP, 3-wire, 115V, 1-phase motor, the provided chart lists 12 gauge copper wire for distances up to 160 ft from service entrance to motor.

Installation Tips

Installation Brief

This 4 inch submersible well pump should be installed according to the Goulds GS Series instructions and matched to the correct 115V, single-phase, 3-wire power supply.

Confirm the pump model, diameter, and electrical specifications match the application.
Follow the product instruction manual for pump and motor assembly, wiring, and well installation.
Use the cast-in safety line loops on the discharge head as provided for installer convenience.
Where high static water level conditions may allow operation outside the recommended range, restrict maximum flow within the pump's recommended operating range as stated in the product literature.
After installation, test pump operation and verify it is operating within its recommended range.