The store will not work correctly when cookies are disabled.
Join the Aqua Science Insiders Club
41 years of Expertise in Engineered Water Treatment and Well SystemsPrice Match GuaranteeLifetime WarrantyThe Largest Selection of Residential Filtration SystemsWell Water Components and SuppliesReplaceable FiltersComplete Water TestingIndustry’s Best BrandsExcellent Tech SupportWater Treatment ChemicalsCustom solutions designed to address your specific needsMost products ship the same day
The Stenner Econ FP Pump is designed for efficient and reliable operation in light-duty water treatment applications. The pump features a user-friendly interface with a six-button control pad and a backlit LCD window for easy programming and monitoring.
Operating Modes
SECONDS (dry contact signal): The pump can run for a set time in response to a dry contact signal, adjustable in 1% increments across five time ranges.
FLOW SWITCH (dry contact signal): In this mode, the pump runs at a set speed when it receives a dry contact signal from a two-wire flow switch. Speed adjustments are available from 10% to 100%.
AUXILIARY (12-24 VAC/VDC signal): The pump operates at a set speed when it receives a 12-24 VAC/VDC signal, with speed adjustments from 10% to 100%.
Applications
This pump is ideal for light-duty applications such as drinking water disinfection, pH adjustment for private water wells, and certain animal health water treatment uses.
Installation and Use
The Stenner Econ FP Pump is suitable for both indoor and outdoor use. For outdoor installations or wet environments, the pump should be mounted vertically. No control box is required for operation.
Frequently Asked Questions
What applications is the Stenner Econ FP Pump suited for?
It is described for light-duty applications such as drinking water disinfection, pH adjustment for private water wells, and certain animal health water treatment uses.
How is this pump activated?
It is flow activated and can accept either a dry contact signal or a 12-24 VAC/VDC signal from control equipment that responds to flow.
What operating modes are available?
The pump offers Seconds, Flow Switch, and Auxiliary modes.
How is the pump programmed?
Programming is done through a six-button control pad with a backlit LCD window.
Can this pump be used outdoors?
Yes. The product data states it is for indoor and outdoor use.
How should it be mounted outdoors or in wet environments?
The product data states the pump must be mounted vertically for wet environments or outdoor use.
Does this pump require a control box?
No. The product data indicates no control box is needed.
The Stenner Econ FP Pump - 30 GPD is a flow-activated pump for light-duty applications such as drinking water disinfection and pH adjustment for private water wells in homes or farms. It can also inject nutrients or supplements into drinking water or disinfect water lines in animal health applications.
What applications is the Stenner Econ FP Pump suited for?
It is described for light-duty applications such as drinking water disinfection, pH adjustment for private water wells, and certain animal health water treatment uses.
How is this pump activated?
It is flow activated and can accept either a dry contact signal or a 12-24 VAC/VDC signal from control equipment that responds to flow.
What operating modes are available?
The pump offers Seconds, Flow Switch, and Auxiliary modes.
How is the pump programmed?
Programming is done through a six-button control pad with a backlit LCD window.
Can this pump be used outdoors?
Yes. The product data states it is for indoor and outdoor use.
How should it be mounted outdoors or in wet environments?
The product data states the pump must be mounted vertically for wet environments or outdoor use.
Does this pump require a control box?
No. The product data indicates no control box is needed.
Validate your login