SJE Wellzone 2 Wire 115-230v Single Phase Pump Controller
Features
Includes a 0-150 PSI pressure transducer (No pressure switch needed)
LCD display with bar graphPressure reading
Pump amp reading
Pump on indicator
Adjustable pressure set pointsStart /Stop pressure set points
High /Low pressure alarms
Advanced functionsDry Run protection
Well recharge timer
Rapid cycle protection
Water filter replacement notification
Alarm history
The WellZone® 2-wire digital controller provides pressure control for single phase 2-wire submersible well pump applications. It uses a 0-150 PSI pressure transducer to monitor the discharge pressure and turns the pump ON and OFF according to the Start and Stop setpoints. The LCD display is visible through the clear cover of the enclosure to allow for quick view of the system pressure, run status, hours run and pump cycles. The rotary button provides the user with a simple navigation method through the menu and program settings. It features built in pump protection including rapid cycling and dry run. It is preprogrammed to run the pump as the pressure drops below 40 PSI and stop as the pressure rises above 60 PSI. High & Low pressure settings are available with an auxiliary alarm relay.
Specifications
NEMA 4X enclosure 8 x 6 x 4 inches (20.32 x 15.24 x 10.16 cm) for indoor or outdoor use with integral padlockable latch for added safety.
Pump run green LED indicator
Pump test switch for manual control of the pump
Menu rotary encoder/selector switch
Menu ESC button
Auxiliary alarm contacts
Digital input for optional floor sensor or float switch
LCD display
Ground lug
Circuit breaker (20A, 2 pole)
cUL/US Listed
5-year limited warranty
