No Lead Brass Pressure Relief Valve-1/2

No Lead Brass Pressure Relief Valve-1/2" MPT, 100PSI

No Lead Brass Pressure Relief Valve

No Lead Brass Pressure Relief Valve

No Lead Brass Pressure Relief Valve-3/4" MPT, 100PSI

CLICK HERE TO CONFIRM THE PRICE
$13.52
SKU#
RVNB07-100NL
In stock
RVNB

Boshart’s relief valves are recommended for all cold water system installations to protect against damage to piping and pressure tanks. Field adjustments are not recommended for these relief valves. Any changes made to the pre-set pressure is entirely at the risk of the person(s) / company who make the adjustment. Relief valves must be installed so that they drain to a floor drain, sump or other safe location with an air break. If an outlet pipe is used then it must be at least the same diameter as the relief valve outlet.

Design Standard

Spring Material Stainless Steel

Inlet Connection MPT

Primary Material Brass

Accuracy +/- 15%

Outlet Connection FPT

Temperature Range Up to 140°F (60°C)

More Information
Model #RVNB
ManufacturerBoshart Industries
Write Your Own Review
You're reviewing:No Lead Brass Pressure Relief Valve-3/4" MPT, 100PSI
Your Rating
What is the primary use of this pressure relief valve?
It is used to protect cold water systems from damage by relieving excess pressure.
Can the pressure setting be adjusted?
Field adjustments are not recommended and any changes are at the user's risk.
What materials are used in this valve?
The valve is made of brass with a stainless steel spring.
What is the temperature range for this valve?
It can handle temperatures up to 140°F (60°C).
What type of connections does this valve have?
It has a 3/4" MPT inlet and an FPT outlet connection.
Where should the valve be installed?
It should be installed to drain to a safe location like a floor drain or sump with an air break.
Is a control box needed for this valve?
No, a control box is not required.

Installation Brief

Ensure safe installation of the No Lead Brass Pressure Relief Valve to protect your water system.

  1. Locate a suitable installation point near a floor drain or sump.
  2. Ensure the outlet drains to a safe location with an air break.
  3. Connect the valve using the 3/4" MPT inlet connection.
Important:
  • Do not adjust the pre-set pressure setting.
  • Ensure the outlet pipe is at least the same diameter as the valve outlet.
No Lead Brass Pressure Relief Valve-3/4" MPT, 100PSINo Lead Brass Pressure Relief Valve-3/4" MPT, 100PSI