No Lead Brass Pressure Relief Valve-3/4

No Lead Brass Pressure Relief Valve-3/4" MPT, 100PSI

No Lead Brass Pressure Relief Valve-1/2" MPT, 100PSI

CLICK HERE TO CONFIRM THE PRICE
$12.50
SKU#
RVNB05-100NL
In stock
RVNB

Boshart’s relief valves are recommended for all cold water system installations to protect against damage to piping and pressure tanks. Field adjustments are not recommended for these relief valves. Any changes made to the pre-set pressure is entirely at the risk of the person(s) / company who make the adjustment. Relief valves must be installed so that they drain to a floor drain, sump or other safe location with an air break. If an outlet pipe is used then it must be at least the same diameter as the relief valve outlet.

Design Standard

Spring Material Stainless Steel

Inlet Connection MPT

Primary Material Brass

Accuracy +/- 15%

Outlet Connection FPT

Temperature Range Up to 140°F (60°C)

More Information
Model #RVNB
ManufacturerBoshart Industries
Write Your Own Review
You're reviewing:No Lead Brass Pressure Relief Valve-1/2" MPT, 100PSI
Your Rating
What is the primary use of this pressure relief valve?
It is used to protect cold water systems from damage due to overpressure.
Can the pressure setting be adjusted?
Field adjustments are not recommended and any changes are at the user's risk.
What is the temperature range for this valve?
The valve can handle temperatures up to 140°F (60°C).
What type of connection does this valve have?
It has a 1/2" MPT inlet connection and an FPT outlet connection.
What material is the valve made from?
The primary material is brass, with a stainless steel spring.
Is a control box needed for this valve?
No, a control box is not required.
Where should the valve be installed?
It should be installed to drain to a safe location like a floor drain or sump.

Installation Brief

Install the No Lead Brass Pressure Relief Valve to safeguard your cold water system from overpressure.

  1. Ensure the valve is installed to drain to a safe location with an air break.
  2. Use an outlet pipe of at least the same diameter as the valve outlet if needed.
  3. Connect the 1/2" MPT inlet to your system.
Important:
  • Do not adjust the pre-set pressure.
  • Ensure proper drainage to prevent water damage.
No Lead Brass Pressure Relief Valve-1/2" MPT, 100PSINo Lead Brass Pressure Relief Valve-1/2" MPT, 100PSI