41 years of Expertise in Engineered Water Treatment and Well Systems
Price Match Guarantee
Lifetime Warranty
The Largest Selection of Residential Filtration Systems
Well Water Components and Supplies
Replaceable Filters
Complete Water Testing
Industry’s Best Brands
Excellent Tech Support
Water Treatment Chemicals
Custom solutions designed to address your specific needs
Most products ship the same day
Toggle Nav 
Goulds Balanced Flow Constant Pressure System, 3HP Motor 10GPM @60PSI - 520ft
SKU#
10GP1530
In stock
Model #: 10GP1530
Motor Horsepower: 3
Phase: 3
Amps: 10.9
Warranty: 3 Year Limited
Wire Count: 3 Wire
Well Depth: 520
Shipping Weight: 70 lbs
Universal Product Code: 69766653415
Features:
- Simple, fast sizing and installation.
- Range curves and selection charts generated from actual R&D tests.
- Kits configured for 30 Hz minimum and 80 Hz maximum operation.
- Wiring is as easy as standard three-wire control box: (1) L1, L2 and Ground in from power supply (2) Red, Yellow, Black and Ground out to motor
- Pressure is factory preset at 50 psi with simple, fast, field adjustability for higher pressures.
- Three phase output to motor reduces wire cost.
- Goulds model GS features the Guardian bearing system and field proven sand and abrasive handling floating stack design.
- New – a Switch Input for connecting a pressure switch or float switch.
- New – Grounding provisions for transducer and transducer cable.
Transducer – NEW AND IMPROVED:
- Larger port orifice to prevent clogging
- Case to electronics surge protection
- All Stainless Steel construction
- Pressure surge capability without the use of a pressure snubber
- Case coupled noise immunity
- Reverse voltage protection
- Line to electronics ground surge protection on all lines
- Transducer cable has ground wire built-in
- Ground clamp provided for transducer to cable grounding
Goulds Balanced Flow Constant Pressure System model 10GP1530 is a ProPak kit with a 3 HP, 230 V three-phase CentriPro motor, Aquavar SOLO controller with transducer, and Goulds 10GS15 GS water end. This system is rated for 10 GPM at 60 PSI and well depths up to 520 ft. It is designed to provide consistent water pressure, uses a small inline pressure tank, and features a wall-mounted NEMA 3 controller that can be mounted outside.
| Phase | 3 |
|---|---|
| Wire Count | 3 Wire |
| Motor Horsepower | 3 |
| Stages | 17 |
| Well Depth | 520 |
| Source | https://www.xylem.com/ |
| Model # | 10GP1530 |
| Manufacturer | Goulds |
| Shipping Weight | 70 |
| Warranty | 3 Year Limited |
Write Your Own Review
What is included in this ProPak kit?
It includes a 3 HP, 230 V CentriPro three-phase motor, an Aquavar SOLO controller with transducer, and a Goulds 10GS15 GS water end pump.
What flow rate is this system rated for?
This system is rated for 10 GPM at 60 PSI.
What well depth is this model designed for?
It is listed for well depths up to 520 ft.
Is a large pressure tank required?
No. The product description states that only a small inline pressure tank is needed.
Can the pressure setting be adjusted?
Yes. The pressure is factory preset at 50 PSI and can be adjusted in the field.
Can the controller be mounted outside?
Yes. The wall-mounted controller is described as NEMA 3 rated and can be mounted outside.
What power and phase are listed for this system?
The motor is listed as 230 V and three phase.
What wiring is described for the system?
The listed wiring is L1, L2, and Ground in from the power supply, with Red, Yellow, Black, and Ground out to the motor.
Installation Brief
This constant pressure system includes a motor, controller with transducer, and pump water end for packaged installation.
- Review the included motor, controller with transducer, and pump components before installation.
- Mount the wall controller in an appropriate location; the product information states the NEMA 3 controller can be mounted outside.
- Connect L1, L2, and Ground from the power supply to the controller as listed in the product information.
- Connect Red, Yellow, Black, and Ground from the controller to the motor.
- Confirm the factory preset pressure setting and make field adjustments if needed.
Check items to add to the cart.
Validate your login