The store will not work correctly when cookies are disabled.
Join the Aqua Science Insiders Club
41 years of Expertise in Engineered Water Treatment and Well SystemsPrice Match GuaranteeLifetime WarrantyThe Largest Selection of Residential Filtration SystemsWell Water Components and SuppliesReplaceable FiltersComplete Water TestingIndustry’s Best BrandsExcellent Tech SupportWater Treatment ChemicalsCustom solutions designed to address your specific needsMost products ship the same day
Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.
Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts.
Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 40 years as a superior sand handling, durable pump design.
FDA Compliant Non-Metallic Parts: Impellers, diffusers, and bearing spiders are constructed of glass-filled engineered composites. They are corrosion resistant and non-toxic.
Discharge Head/Check Valve: Cast 303 stainless steel for strength and durability. Two cast-in safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation.
Motor Adapter: Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using a standard open-end wrench.
Stainless Steel Casing: Polished stainless steel is strong and corrosion-resistant.
Hex Shaft Design: Six-sided shafts for positive impeller drive.
Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl® bearing spider for excellent abrasion resistance.
Important: Any well with a high static water level may allow the pump to operate off the curve and outside its recommended range. We recommend using a "Dole" flow restriction valve to throttle the pump to prevent upthrust damage to the pump and motor. The maximum flow must be restricted to within the pump's recommended operating range.
Goulds 10GS15422C is a 4 inch stainless steel submersible well pump rated for 10 GPM, 1.5 HP, 230V, single phase operation with a 2-wire configuration. This model is designed for continuous operation within the motor manufacturer's working limits and does not require a control box.
Its construction includes a polished stainless steel casing, cast 303 stainless steel discharge head and motor adapter, a built-in check valve, and a floating impeller stack for sand handling. Glass-filled engineered composite impellers, diffusers, and bearing spiders are corrosion resistant and non-toxic, while engineered polymer bearings and a hex shaft design support durability and positive impeller drive.
What are the electrical specifications for the Goulds 10GS15422C?
This pump is rated at 1.5 HP, 230V, single phase, and 9 amps with a 2-wire configuration.
What flow rating is this pump designed for?
The Goulds 10GS15422C is a 10 GPM submersible well pump.
Does this pump require a control box?
No. This 2-wire model does not require a control box.
What size pump is this?
It is a 4 inch diameter submersible well pump.
Is this pump suitable for continuous operation?
Yes. It is described as powered for continuous operation within the motor manufacturer's working limits.
How does this pump handle sand?
It uses a face clearance, floating impeller stack design described as a superior sand handling design.
What materials are used in the pump?
It features a polished stainless steel casing, cast 303 stainless steel components, and glass-filled engineered composite impellers, diffusers, and bearing spiders.
Does the pump include a check valve?
Yes. It has a built-in check valve made with stainless steel and FDA compliant BUNA rubber.
This 4 inch submersible well pump should be installed according to the Goulds GS series instructions and matched to the pump's 230V, single phase, 2-wire requirements.
Confirm the pump model, 4 inch diameter, voltage, phase, and 2-wire configuration match the system requirements.
Install the pump using the built-in safety line loops provided on the discharge head for installer convenience.
Complete the pump and motor assembly and connection work following the manufacturer instructions for this GS series pump.
If the well has a high static water level, restrict maximum flow to keep operation within the pump's recommended operating range.
After installation, test pump operation and verify it is running within the recommended range.
Validate your login