Skip to the beginning of the images gallery

Square-D(Telemecanique) Pressure Switch Type-G - Heavy Duty 40/60 PSI

Be the first to review this product

MSRP $181.00

Sale Price $90.50

50% OFF Factory Direct Saving

SKU#

9013GSG2J24

In stock

9013GSG2J24

Square-D(Telemecanique) Pressure Switch Type-G - Heavy Duty 40/60 PSI

The Square-D Pressure Switch Type-G is designed for heavy-duty applications, offering reliable control for electrically driven water pumps and air compressors. Ideal for maintaining consistent water pressure in well pump systems, this switch is built to handle a range of pressures and is suitable for both single-phase and polyphase motors.

Contact Arrangement: DPST
Action: Standard Action
Actuator Type: Diaphragm
Application: Control electrically driven water pumps and air compressors
Approvals: UL Listed, CSA Certified
Pressure Setting: 40 to 60 PSIG
Maximum Allowable Pressure: 300 PSIG
Enclosure Type: General Purpose (Indoor)
Enclosure Rating: NEMA 1
Horsepower Rating: Up to 5HP at 460/575VAC for polyphase motors
Mounting Type: Bracket

Specifications

Model #: 9013GSG2J24
Depth: 3.68 Inches
Height: 5.72 Inches
Width: 3.44 Inches
Weight: 2.25 Pounds
Pressure Connection: 0.25 Inch NPSF
Terminal Type: Screw Clamp
Maximum Voltage Rating: 575VAC
Shipping Weight: 2 Pounds

Documentation

Frequently Asked Questions

What is the purpose of a pressure switch?: A pressure switch controls a well pump system, maintaining water pressure by signaling the pump to turn on or off based on pressure levels.
What does 40/60 PSI mean?: The 40/60 PSI setting means the switch activates the pump at 40 PSI and deactivates it at 60 PSI, maintaining consistent water pressure.
Is this pressure switch suitable for all pump types?: This heavy-duty switch is recommended for pumps between 2.0 HP and 5.0 HP. For pumps 1.5 HP and below, a standard switch is sufficient.
What is a low cut-off pressure switch?: It turns off the pump if the pressure drops 10 PSI below the cut-in pressure, preventing potential flooding from leaks.
How do I troubleshoot a pressure switch?: Turn off power, check for leaks, inspect contact points, and ensure the spring is not worn out. Replace if necessary.
What are the electrical ratings for this switch?: It supports up to 5HP at 460/575VAC for polyphase motors and 3HP at 230VAC for single-phase motors.
What is the enclosure rating for this switch?: The switch has a NEMA 1 general-purpose indoor enclosure rating.

Overview

Heavy-duty Square-D Type G pressure switch with a 40/60 PSIG pressure setting for control of electrically driven water pumps and air compressors. This DPST switch features adjustable differential, bracket mounting, a 0.25 inch NPSF pressure connection, and a general-purpose indoor NEMA 1 enclosure.

Specifications

More Information
Source	https://www.xylem.com/
Model #	9013GSG2J24
Manufacturer	Square-D
Shipping Weight	2

Reviews

Write Your Own Review

Product Literature

Square D 9013F Pressure Switch Instructions

(Size: 0.15 MB)

Square D 9013F-G Pressure Switch Troubleshooting

(Size: 0.1 MB)

Square D FSG Pressure Switch Catalog

(Size: 0.13 MB)

FAQs

What does the 40/60 PSIG setting mean?

It means the switch is set to turn the pump on at 40 PSIG and off at 60 PSIG.

What is this pressure switch used to control?

It is used to control electrically driven water pumps and air compressors.

Is this a heavy-duty pressure switch?

Yes, it is a Type G heavy-duty pressure switch.

What is the pressure connection size?

The pressure connection is 0.25 inch NPSF.

What enclosure type does it have?

It has a general-purpose indoor enclosure with a NEMA 1 rating.

What is the maximum allowable pressure?

The maximum allowable pressure is 300 PSIG.

What mounting type does this switch use?

It uses bracket mounting.

What terminal type does it use?

It uses screw clamp terminals.

Installation Tips

Installation Brief

This pressure switch is installed as part of a pump or compressor control system and should be set up carefully using the product's rated connection and mounting style.

Turn off power to the equipment before installation or service.
Mount the switch using its bracket mounting configuration.
Connect the switch at the 0.25 inch NPSF pressure connection.
Complete wiring at the screw clamp terminals according to the system requirements.
Restore power and verify the switch operates at the intended pressure setting.