Pentek DGD-5005 Dual-Gradient Polypropylene Cartridge

Pentek DGD-5005 Dual-Gradient Polypropylene Cartridge

Pentek, PCC-1, PCC Series, Hexametaphosphate Crystal Cartridge

Pentek, PCC-1, PCC Series, Hexametaphosphate Crystal Cartridge

Pentek DGD-5005-20 Dual-Gradient Polypropylene Cartridge

CLICK HERE TO CONFIRM THE PRICE
MSRP $70.00
Sale Price $35.00
50% OFF Factory Direct Saving
SKU#
155358-43
In stock
Free Shipping
155358-43

EPM Series Carbon Cartridge

EPM Series cartridges have a nominal 20‑micron filtration rating, high porosity, and effective chlorine taste & odor reduction. The high‑porosity design prevents premature plugging, maximizes carbon utilization, and maintains a low pressure drop throughout the cartridge’s life.

Key Features

  • Industry‑standard chlorine, bad taste & odor removal at an economical value
  • Basic chlorine reduction plus 20 µm sediment filtration for residential chlorinated water
  • Standard 2.5" diameter × 10" length fits most housings
  • Enhanced dirt‑holding capacity—minimizes pressure drop over cartridge life

The Pentek DGD-5005-20 dual-gradient polypropylene cartridge is designed for sediment removal and chlorine taste and odor reduction in whole house water systems. It features a nominal 20-micron rating, a standard 2.5-inch diameter by 10-inch length, and a dual-gradient design that increases dirt-holding capacity while helping maintain low pressure drop.

More Information
Model #155358-43
ManufacturerPentek
Write Your Own Review
You're reviewing:Pentek DGD-5005-20 Dual-Gradient Polypropylene Cartridge
Your Rating
What is the filtration rating of the Pentek DGD-5005-20?
It has a nominal 20-micron filtration rating.
What size is this cartridge?
It measures 2.5 inches in diameter and 10 inches in length.
What is the cartridge made from?
It is made from polypropylene.
What does the dual-gradient design do?
It enhances dirt-holding capacity and helps minimize pressure drop.
Does this cartridge reduce chlorine taste and odor?
Yes, the supplied description says it reduces chlorine taste and odor.
What type of systems is it described for?
It is described for whole house water systems and suitable for residential chlorinated water systems.
Will it fit standard housings?
The supplied description says the standard 2.5-inch by 10-inch size fits most housings.
Is a control box required?
No, a control box is not required.

Installation Brief

This replacement cartridge installs inside a compatible filter housing as part of a whole house water filtration setup.

  1. Turn off the water supply to the filter housing before opening the system.
  2. Open the housing and remove the used cartridge.
  3. Clean the housing if needed.
  4. Insert the Pentek DGD-5005-20 cartridge into the housing.
  5. Reassemble the housing and restore the water supply.
  6. Check the housing for leaks after the system is back in service.
Pentek DGD-5005-20 Dual-Gradient Polypropylene CartridgePentek DGD-5005-20 Dual-Gradient Polypropylene Cartridge