JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Skip to the beginning of the images gallery

Goulds Balanced Flow Constant Pressure System, 2HP Motor 7GPM at 60PSI - 500ft

Be the first to review this product

CLICK HERE TO CONFIRM THE PRICE

SKU#

7GP1020

In stock

7GP1020

Goulds Balanced Flow Constant Pressure System, 2HP Motor 7GPM at 60PSI - 500ft - 7GP1020

Experience reliable and efficient water pressure management with the Goulds Balanced Flow Constant Pressure System. Designed for optimal performance, this system is equipped with a powerful 2HP motor, ensuring a consistent flow rate of 7 gallons per minute at 60 PSI. Suitable for depths up to 500 feet, this model (7GP1020) is a perfect solution for various water supply applications.

Key Features

Simple, fast sizing and installation.
Range curves and selection charts generated from actual R&D tests.
Kits configured for 30 Hz minimum and 80 Hz maximum operation.
Wiring is as easy as standard three-wire control box: (1) L1, L2, and Ground in from power supply (2) Red, Yellow, Black, and Ground out to motor.
Pressure is factory preset at 50 psi with simple, fast, field adjustability for higher pressures.
Three-phase output to motor reduces wire cost.
Goulds model GS features the Guardian bearing system and field-proven sand and abrasive handling floating stack design.
New – a Switch Input for connecting a pressure switch or float switch.
New – Grounding provisions for transducer and transducer cable.

Transducer – NEW AND IMPROVED

Larger port orifice to prevent clogging
Case to electronics surge protection
All Stainless Steel construction
Pressure surge capability without the use of a pressure snubber
Case coupled noise immunity
Reverse voltage protection
Line to electronics ground surge protection on all lines
Transducer cable has ground wire built-in
Ground clamp provided for transducer to cable grounding

Technical Specifications

Manufacturer: Goulds
Model #: 7GP1020
Motor Horsepower: 2
Phase: 3
Amps: 6.9
Flow Rate: 7 GPM
Warranty: 3 Year Limited
Wire Count: 3 Wire
Well Depth: 500 ft
Shipping Weight: 62 lbs
Universal Product Code: 69766653431

Performance Chart

Shipping Information

Enjoy free shipping on your purchase, ensuring that your Goulds Balanced Flow Constant Pressure System arrives safely and promptly at your doorstep.

Overview

Goulds ProPak Kit include:

CentriPro Three Phase Motor 2 HP, 230 V - M20432
CentriPro Aquavar SOLO™ Controller with Transducer - 3AS20
Goulds Pumps GS Water End (pump) - 7GS10 - (1 1/4" Female NPT discharge)

The Gould ProPak has several advantages over a traditional submersible pump system:

City-like water pressure at every faucet no matter the demand
Lower electricity usage by 50% due to the controller converting single phase to 3 phase
0-100 PSI Pressure Setting with finger controlled adjustments
Only a small inline pressure tank is needed, no large bulky floor stand models are required
Wall mounted controller saves space and is Nema 3 rated and can be mounted outside
Designed for continuous operation: Ideal for larger homes, irrigation systems, tight installation clearance issues, and geothermal applications.
High quality Goulds GS stainless steel pump with sand and abrasion resistant design
Self Diagnostic Controls check for Dry Well Ground Fault, Short Circuit Disconnected Lead, High Pressure Sensor, Temperature Fault
Smaller gauge wire is required

Specifications

More Information
Phase	3
Wire Count	3 Wire
Motor Horsepower	2
Flow Rate	7
Stages	17
Well Depth	500
Source	https://www.xylem.com/
Model #	7GP1020
Manufacturer	Goulds
Shipping Weight	62
Warranty	3 Year Limited