JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Skip to the beginning of the images gallery

Goulds Balanced Flow Constant Pressure System, 1.5HP Motor 18GPM @60PSI - 100ft

Be the first to review this product

CLICK HERE TO CONFIRM THE PRICE

SKU#

18GP0715

In stock

18GP0715

Goulds Balanced Flow Constant Pressure System

Experience the efficiency and reliability of the Goulds Balanced Flow Constant Pressure System. Designed for optimal performance, this system ensures constant water pressure with a 1.5HP motor delivering up to 18 gallons per minute at 60 PSI. Ideal for deep well applications up to 100 feet, this system is a perfect choice for both residential and commercial water supply needs.

Key Features

Simple, fast sizing and installation.
Range curves and selection charts generated from actual R&D tests.
Kits configured for 30 Hz minimum and 80 Hz maximum operation.
Wiring is as easy as standard three-wire control box: (1) L1, L2 and Ground in from power supply (2) Red, Yellow, Black and Ground out to motor.
Pressure is factory preset at 50 psi with simple, fast, field adjustability for higher pressures.
Three phase output to motor reduces wire cost.
Goulds model GS features the Guardian bearing system and field proven sand and abrasive handling floating stack design.
New – a Switch Input for connecting a pressure switch or float switch.
New – Grounding provisions for transducer and transducer cable.

Improved Transducer

Larger port orifice to prevent clogging
Case to electronics surge protection
All Stainless Steel construction
Pressure surge capability without the use of a pressure snubber
Case coupled noise immunity
Reverse voltage protection
Line to electronics ground surge protection on all lines
Transducer cable has ground wire built-in
Ground clamp provided for transducer to cable grounding

Specifications

Model #: 18GP0715
Motor Horsepower: 1.5
Phase: 3
Amps: 4.2
Flow Rate: 18 GPM
Warranty: 3 Year Limited
Wire Count: 3 Wire
Well Depth: 100 ft
Shipping Weight: 56 lbs
Universal Product Code: 69766653416

Shipping

Enjoy the convenience of free shipping on this product.

Performance Chart

Overview

Goulds ProPak Kit include:

CentriPro Three Phase Motor 1.5 HP, 230 V - M15432
CentriPro Aquavar SOLO™ Controller with Transducer - 3AS20
Goulds Pumps GS Water End (pump) - 18GS07 - (1 1/4" Female NPT discharge)

The Gould ProPak has several advantages over a traditional submersible pump system:

City-like water pressure at every faucet no matter the demand
Lower electricity usage by 50% due to the controller converting single phase to 3 phase
0-100 PSI Pressure Setting with finger controlled adjustments
Only a small inline pressure tank is needed, no large bulky floor stand models are required
Wall mounted controller saves space and is Nema 3 rated and can be mounted outside
Designed for continuous operation: Ideal for larger homes, irrigation systems, tight installation clearance issues, and geothermal applications.
High quality Goulds GS stainless steel pump with sand and abrasion resistant design
Self Diagnostic Controls check for Dry Well Ground Fault, Short Circuit Disconnected Lead, High Pressure Sensor, Temperature Fault
Smaller gauge wire is required

Specifications

More Information
Phase	3
Wire Count	3 Wire
Motor Horsepower	1.5
Flow Rate	18
Stages	6
Well Depth	100
Source	https://www.xylem.com/
Model #	18GP0715
Manufacturer	Goulds
Performance Chart	None
Shipping Weight	56
Warranty	3 Year Limited

Reviews

Write Your Own Review

Performance Chart

Goulds Balanced Flow Constant Pressure System, 1.5HP Motor 18GPM @60PSI - 100ft

Additional Info

Product Literature

Aquavar SOLO2 Installation Guide

(Size: 0.52 MB)

Goulds Aquavar Installation and Troubleshooting

(Size: 2.44 MB)

Goulds Aquavar Propak Brochure

(Size: 1.74 MB)

Goulds Aquavar Propak, 30-80hz Specifications

(Size: 0.63 MB)

Goulds Aquavar Solo 2 Instruction Manual

(Size: 2.44 MB)

Goulds Variable Speed Controller Hazard Statement

(Size: 0.13 MB)

Technical Brochure

(Size: 0.59 MB)

FAQs

What is the maximum depth this system can handle?

The Goulds Balanced Flow System is designed for well depths up to 100 feet.

What are the power requirements for this system?

It requires a 230V power supply and operates with a three-phase motor.

Is a large pressure tank needed?

No, only a small inline pressure tank is required, saving space and installation complexity.

Can the pressure settings be adjusted?

Yes, the pressure is factory preset at 50 PSI but can be easily adjusted in the field.

What type of motor does this system use?

It uses a CentriPro Three Phase Motor with 1.5 HP.

Does this system include a controller?

Yes, it includes a CentriPro Aquavar SOLO™ Controller with a transducer.

Is the system suitable for outdoor installation?

Yes, the wall-mounted controller is Nema 3 rated for outdoor use.

Installation Tips

Installation Brief

Installing the Goulds Balanced Flow Constant Pressure System requires basic electrical and plumbing skills. Professional installation is recommended for optimal performance and safety.

Mount the controller on a suitable wall, ensuring it is Nema 3 rated for outdoor use if necessary.
Connect the power supply to the controller using L1, L2, and Ground wires.
Connect the motor to the controller using Red, Yellow, Black, and Ground wires.
Install the pump in the well, ensuring it is securely positioned at the correct depth.
Connect the transducer and ensure proper grounding using the provided clamp.
Adjust the pressure settings as needed for your specific application.

Important:

Ensure all electrical connections are secure and comply with local codes.
Verify that the system is properly grounded to prevent electrical hazards.
Do not attempt installation without proper knowledge or experience; consult a professional if needed.