Goulds Balanced Flow Constant Pressure System, 3HP Motor 35GPM @60PSI - 85ft

CLICK HERE TO CONFIRM THE PRICE
MSRP $6,221.00
Sale Price $4,300.00
30% OFF Factory Direct Saving
SKU#
35GP1530
In stock
Free Shipping
35GP1530
Goulds Balanced Flow Constant Pressure System

Manufacturer: Goulds

Categories: Goulds Constant Pressure Systems, Pumps, Tanks & Well Components, Products, Root Catalog

Model #: 35GP1530

Motor Horsepower: 3

Phase: 3

Amps: 10.9

Flow Rate: 33 GPM

Warranty: 3 Year Limited

Wire Count: 3 Wire

Well Depth: 85 ft

Shipping Weight: 67 lbs

  • Simple, fast sizing and installation.
  • Range curves and selection charts generated from actual R&D tests.
  • Kits configured for 30 Hz minimum and 80 Hz maximum operation.
  • Wiring is as easy as standard three-wire control box: (1) L1, L2 and Ground in from power supply (2) Red, Yellow, Black and Ground out to motor
  • Pressure is factory preset at 50 psi with simple, fast, field adjustability for higher pressures.
  • Three phase output to motor reduces wire cost.
  • Goulds model GS features the Guardian bearing system and field proven sand and abrasive handling floating stack design.
  • New – a Switch Input for connecting a pressure switch or float switch.
  • New – Grounding provisions for transducer and transducer cable.

Balanced Flow Controller – NEW FEATURES:

  • New, more versatile user interface board
  • Provides switch connection for optional pressure or level switch
  • New current limit settings for all new CentriPro motors
  • Dry well sensitivity switch
  • Broken pipe protection
  • 5 or 20 PSI pressure drop restart switch
  • Transducer better protected from transient power surges

Transducer – NEW AND IMPROVED:

  • Larger port orifice to prevent clogging
  • Case to electronics surge protection
  • All Stainless Steel construction
  • Pressure surge capability without the use of a pressure snubber
  • Case coupled noise immunity
  • Reverse voltage protection
  • Line to electronics ground surge protection on all lines
  • Transducer cable has ground wire built-in
  • Ground clamp provided for transducer to cable grounding

Goulds ProPak Kit include:

  • CentriPro Three Phase Motor 3 HP, 230 V - M30432
  • CentriPro Aquavar SOLO™ Controller with Transducer - 3AS30
  • Goulds Pumps GS Water End (pump) - 35GS15 - (2" Female NPT discharge)

The Gould ProPak has several advantages over a traditional submersible pump system:

  • City-like water pressure at every faucet no matter the demand
  • Lower electricity usage by 50% due to the controller converting single phase to 3 phase
  • 0-100 PSI Pressure Setting with finger controlled adjustments
  • Only a small inline pressure tank is needed, no large bulky floor stand models are required
  • Wall mounted controller saves space and is Nema 3 rated and can be mounted outside
  • Designed for continuous operation:  Ideal for larger homes, irrigation systems, tight installation clearance issues, and geothermal applications.
  • High quality Goulds GS stainless steel pump with sand and abrasion resistant design
  • Self Diagnostic Controls check for Dry Well Ground Fault, Short Circuit Disconnected Lead, High Pressure Sensor, Temperature Fault
  • Smaller gauge wire is required

 

More Information
Phase3
Wire Count3 Wire
Motor Horsepower3
Flow Rate33
Stages 8
Well Depth85
Sourcehttps://www.xylem.com/
Model #35GP1530
ManufacturerGoulds
Shipping Weight67
Warranty3 Year Limited
Write Your Own Review
You're reviewing:Goulds Balanced Flow Constant Pressure System, 3HP Motor 35GPM @60PSI - 85ft
Your Rating
Goulds Balanced Flow Constant Pressure System, 3HP Motor 35GPM @60PSI - 85ft
What are the main benefits of the Goulds Balanced Flow System?
It provides consistent water pressure, reduces electricity usage by 50%, and requires only a small inline pressure tank.
Is this system suitable for outdoor installation?
Yes, the wall-mounted controller is Nema 3 rated, making it suitable for outdoor installation.
What is the flow rate of this system?
The system has a flow rate of 35 gallons per minute at 60 PSI.
What type of motor does this system use?
It uses a CentriPro Three Phase Motor with 3 HP.
How does the system handle sand and abrasives?
The Goulds GS pump features a sand and abrasion-resistant design with a floating stack.
What is the warranty period for this system?
The system comes with a 3-year limited warranty.
What is the maximum well depth for this system?
The system is designed for a well depth of up to 85 feet.

Installation Brief

Installing the Goulds Balanced Flow Constant Pressure System requires careful attention to electrical and plumbing connections.

  1. Mount the Nema 3 rated controller securely on a wall.
  2. Connect L1, L2, and Ground from the power supply to the controller.
  3. Connect Red, Yellow, Black, and Ground from the controller to the motor.
  4. Adjust pressure settings as needed using the user interface board.
Important:
  • Ensure all electrical connections are made by a licensed electrician.
  • Verify that the system is properly grounded to prevent electrical faults.
Goulds Balanced Flow Constant Pressure System, 3HP Motor 35GPM @60PSI - 85ftGoulds Balanced Flow Constant Pressure System, 3HP Motor 35GPM @60PSI - 85ft