Davey BT30-30, 1.5HP, 230V, 30GPM Max, 30 PSI Max, Pressure Boosting Pumps with Torrium Control

CLICK HERE TO CONFIRM THE PRICE
MSRP $2,840.00
Sale Price $1,420.00
50% OFF Factory Direct Saving
SKU#
BT30-30
In stock
Free Shipping
BT30-30

Easy to Install

•T-2 Swivels 360 Degrees
•Can Discharge Side, Top or Both
•Pump comes with Stainless Steel Hose
•T-2 Mounts to pump w/O-Ring seal

NO Tape or Thread Compound Needed  

Torrium 2 Features

•Built In Check Valve
•Built In Accumulator
•Dry Protection
•Adaptive Cut In
•Low Noise 54 dBa
•Stainless Steel Pump
•Robust Reliable Pump

Torrium® controlled pump for average to large homes with two stories or long runs of plumbing. Also good for whole house applications from a gravity feed tank. Not recommended for incoming pressure above 20-25 psi. A pressure reducing valve may be used before the pump to limit the pressure.

Benefits

Manufactured from highest quality corrosion resistant materials - meets ANSI/NSF61
Torrium offers even pressure without cycling
Adaptive cut-in pressure on Torrium allows for installation on higher static head installations
Cut-in Pressure - Adapts to 80% of last shut-off head pressure
Pump protected from damage caused by dry running
Low-pressure loss through removable built-in check valve
Constructed from corrosion-resistant materials
High-quality, purpose-designed electric motor
The motor and Pump are designed for frequent starts
Low Maintenance
Discharge may be rotated through 360°, plus a 12" high quality, 304 stainless steel braided discharge hose included - reduces noise transmission through household plumbing and makes plumbing easier

https://daveywater.com/

More Information
Phase1
Voltage230v
Motor Horsepower1.5
Max Flowrate30
Discharge Connection 1" FPT inlet / oulet
Model #BT30-30
ManufacturerDavey
Shipping Weight32
Warranty3 Years
Maximum Boost30
Write Your Own Review
You're reviewing:Davey BT30-30, 1.5HP, 230V, 30GPM Max, 30 PSI Max, Pressure Boosting Pumps with Torrium Control
Your Rating
Davey BT30-30, 1.5HP, 230V, 30GPM Max, 30 PSI Max, Pressure Boosting Pumps with Torrium Control
pdf
(Size: 0.99 MB)
pdf
(Size: 0.8 MB)
pdf
(Size: 0.32 MB)
What is the maximum flow rate of the Davey BT30-30 pump?
The maximum flow rate is 30 gallons per minute.
Can the Davey BT30-30 handle high incoming water pressure?
It is not recommended for incoming pressure above 20-25 psi. A pressure reducing valve may be used.
What type of motor does the Davey BT30-30 use?
It uses a high-quality, purpose-designed electric motor suitable for frequent starts.
Is the pump protected against dry running?
Yes, the pump includes dry protection to prevent damage.
What materials are used in the construction of the pump?
The pump is made from high-quality, corrosion-resistant materials.
Does the pump require a control box?
No, the Davey BT30-30 does not require a control box.
What is the maximum liquid temperature the pump can handle?
The pump can handle a maximum liquid temperature of 150°F.

Installation Brief

The Davey BT30-30 is designed for easy installation in homes requiring pressure boosting.

  1. Ensure the incoming pressure is below 20-25 psi.
  2. Install a pressure reducing valve if necessary.
  3. Connect the pump using the included stainless steel braided hose.
  4. Position the discharge as needed with the 360° swivel feature.
  5. Secure all connections with the O-ring seal.
Important:
  • Do not exceed the maximum system pressure of 100 psi.
  • Ensure electrical connections comply with local regulations.
  • Consider professional installation if unsure.
Davey BT30-30, 1.5HP, 230V, 30GPM Max, 30 PSI Max, Pressure Boosting Pumps with Torrium ControlDavey BT30-30, 1.5HP, 230V, 30GPM Max, 30 PSI Max, Pressure Boosting Pumps with Torrium Control