Davey BT20-30, 1HP, 115V, 27GPM Max, 50PSI Max, Pressure Boosting Pumps with Torrium Control

CLICK HERE TO CONFIRM THE PRICE
MSRP $2,484.00
Sale Price $1,242.00
50% OFF Factory Direct Saving
SKU#
BT20-30
In stock
Free Shipping
BT20-30

Easy to Install

•T-2 Swivels 360 Degrees
•Can Discharge Side, Top or Both
•Pump comes with Stainless Steel Hose
•T-2 Mounts to pump w/O-Ring seal

NO Tape or Thread Compound Needed 

 

Torrium 2 Features

•Built In Check Valve
•Built In Accumulator
•Dry Protection
•Adaptive Cut In
•Low Noise 54 dBa
•Stainless Steel Pump
•Robust Reliable Pump

The Davey BT20-30 is a 1 HP, 115V pressure boosting pump with Torrium control for average to large homes with two stories or long plumbing runs. It is also suited for whole-house applications from a gravity feed tank. Torrium control helps provide even pressure without cycling, while built-in dry-run protection and a removable built-in check valve support reliable operation.

This pump is built from corrosion-resistant materials and meets ANSI/NSF61. The discharge can rotate through 360°, and a 12 inch 304 stainless steel braided discharge hose is included to help reduce noise transmission through household plumbing and simplify plumbing connections.

More Information
Phase1
Motor Horsepower1
Max Flowrate27
Discharge Connection 1 1/4" FPT in - 1" FPT out
Model #BT20-30
ManufacturerDavey
Shipping Weight32
Warranty3 Years
Maximum Boost50
Write Your Own Review
You're reviewing:Davey BT20-30, 1HP, 115V, 27GPM Max, 50PSI Max, Pressure Boosting Pumps with Torrium Control
Your Rating
Davey BT20-30, 1HP, 115V, 27GPM Max, 50PSI Max, Pressure Boosting Pumps with Torrium Control
pdf
(Size: 0.99 MB)
pdf
(Size: 0.8 MB)
pdf
(Size: 0.32 MB)
What is the maximum flow rate of the Davey BT20-30?
The maximum flow rate is 27 GPM.
What is the maximum pressure boost of this pump?
The BT20-30 provides up to 50 PSI maximum boost.
What type of homes is this pump intended for?
It is intended for average to large homes with two stories or long plumbing runs.
Can this pump be used with a gravity feed tank?
Yes, it is also good for whole-house applications from a gravity feed tank.
How does the Torrium control help performance?
Torrium control offers even pressure without cycling.
Does the pump include dry-run protection?
Yes, the pump is protected from damage caused by dry running.
What are the connection sizes?
The connector is 1 1/4 inch FPT inlet and 1 inch FPT outlet.
What comes with the discharge connection?
A 12 inch 304 stainless steel braided discharge hose is included.

Installation Brief

The BT20-30 is designed for straightforward pressure booster installation with a rotating discharge and included braided discharge hose.

  1. Place the pump on a stable surface in the planned installation position.
  2. Connect the 1 1/4 inch FPT inlet and 1 inch FPT outlet according to the system layout.
  3. Rotate the discharge as needed for the plumbing arrangement.
  4. Install the included 12 inch stainless steel braided discharge hose.
  5. Check all connections before startup and confirm incoming pressure is not above 20 to 25 psi.
Davey BT20-30, 1HP, 115V, 27GPM Max, 50PSI Max, Pressure Boosting Pumps with Torrium ControlDavey BT20-30, 1HP, 115V, 27GPM Max, 50PSI Max, Pressure Boosting Pumps with Torrium Control