Stainless Steel Cycle Stop Valve System with WX-102 Tank

The Cycle Stop Valve Constant Pressure System is an effective way to have steady water pressure, reduced pump cycling, and a reduced pressure tank size all without using a variable frequency drive (VFD) constant pressure system.

The CSV1A Stainless Steel Cycle Stop Valve can automatically adjust pump output to match variable flow requirements. It is a pressure adjustable valve, and can handle from 1-25 GPM.

All Stainless Steel Components:

1" MPT x 1" Barb
Check Valve (1" FPT)
(2) Nipples (1" x 2" MPT)
Cycle Stop Valve #CSV1A
(2) Plugs (1/2")
Amtrol Well-X-Trol WX-102 Pressure Tank
Coupling (1 1/4" FPT)
1" / 1-1/4" Manifold
Plug (1")
Hose Bib (3/4" MPT)
Pressure Gauge - Back Mount (1/4" MPT)
Bushing (1" MPT x 1/4" FPT)
Nipple (1/4" x 3" MPT)
Pressure Relief Valve, preset at 100 PSI (3/4" MPT)
Shutoff Valve (1" FPT)
Square-D Pressure Switch, choose from 20/40, 30/50, 40/60, 50/70 or 60/80 PSI at checkout (additional $4.00 charge for 30/50 Low cut-off & 40/60 Low cut-off, and $46.00 charge for 50/70 & 60/80).
Mounting Bracket and Hardware
Teflon Tape for Stainless Steel included

More Information
Source	https://cyclestopvalves.com/
Model #	SS-CSV-TPAK-102
Manufacturer	Amtrol
Performance Chart	None
Shipping Weight	20

Write Your Own Review

Cycle Stop CSV1A Installation Instructions

(Size: 0.05 MB)

What is the flow range of the Cycle Stop Valve?

The Cycle Stop Valve can handle a flow range of 1-25 GPM.

What materials are used in the Cycle Stop Valve?

The valve is made from 304 stainless steel with a molded thermoplastic spring cage and an EPDM diaphragm.

How does the Cycle Stop Valve maintain constant pressure?

It automatically adjusts pump output to match variable flow requirements, keeping downstream pressure constant.

What are the pressure settings for optimal performance?

The Cycle Stop Valve pressure should be set between the cut-in and cut-off of the pressure switch, ideally 5 psi higher than the cut-in pressure.

Is the installation package pre-assembled?

No, the installation package comes unassembled.

What is the maximum temperature the valve can handle?

The maximum temperature is 180°F.

Does the system require a control box?

No, a control box is not needed for this system.

Installation Brief

Installing the Stainless Steel Cycle Stop Valve System requires careful attention to pressure settings and component assembly.

Ensure all components are present and undamaged.
Assemble the Cycle Stop Valve with the pressure tank and other components as per the manual.
Adjust the pressure settings according to your system's requirements.
Connect the system to your water supply and test for leaks.

Important: