Poly Guard Crystal Cartridge(#10) PCC1

CLICK HERE TO CONFIRM THE PRICE
MSRP $120.00
Sale Price $60.00
50% OFF Factory Direct Saving
SKU#
PRO-PRODUCTS-GP10C
In stock
PRO-PRODUCTS-GP10C

SCALE RUST PREVENTER
PREVENT HARD WATER RUST
Poly Guard Crystal is an economical and safe way to treat hard water and iron in the water without the use of a water softener. Poly Guard slowly dissolves food grade crystals into the water supply, protecting plumbing and water-using appliances from corrosion and hard water. In addition, the Poly Guard extends the life of your plumbing and appliances by leaving a protective coating on the interior walls. This coating of the plumbing also has the added benefit reducing the leaching of copper and lead into drinking water. One Poly Guard Cartridge will last up to six months while treating up to 30,000 gallons of water.
Poly Guard sequesters hard water (maximum 12 grains per gallon hardness), reducing scale build up, and sequesters low levels of iron (maximum 1 part per million iron), reducing hard water rust staining. Temperature range 40-125F (4.4-37.8C). This product is NSF Certified to meet NSF/ANSI Standard 60 for drinking water additives.

More Information
MaterialHexametaphosphate Crystal
Size10" X 2 1/2"
Model #PRO-PRODUCTS-GP10C
ManufacturerAqua Science
Shipping Weight2
Write Your Own Review
You're reviewing:Poly Guard Crystal Cartridge(#10) PCC1
Your Rating
What does the Poly Guard Crystal Cartridge do?
It treats hard water and iron, preventing scale and rust without a water softener.
How long does one cartridge last?
Each cartridge lasts up to six months, treating up to 30,000 gallons of water.
What is the maximum hardness and iron level it can handle?
It can handle up to 12 grains per gallon of hardness and 1 part per million of iron.
Is the Poly Guard Crystal Cartridge NSF Certified?
Yes, it meets NSF/ANSI Standard 60 for drinking water additives.
What are the temperature limits for this cartridge?
The cartridge operates effectively between 40-125°F (4.4-37.8°C).
What size is the cartridge?
The cartridge measures 10" x 2 1/2".
Does it require a control box?
No, a control box is not needed for this cartridge.

Installation Brief

Installing the Poly Guard Crystal Cartridge is straightforward and enhances water quality by preventing scale and rust.

  1. Turn off the water supply to the filter housing.
  2. Unscrew the housing and remove the old cartridge.
  3. Insert the new Poly Guard Crystal Cartridge into the housing.
  4. Screw the housing back on securely.
  5. Turn the water supply back on and check for leaks.
Important:
  • Ensure the water supply is turned off before installation.
  • Check for leaks after installation to prevent water damage.
  • Consult a professional if unsure about installation procedures.
Poly Guard Crystal Cartridge(#10) PCC1Poly Guard Crystal Cartridge(#10) PCC1