KX Matrikx CTO Carbon Filter 10x2.5" CLOSEOUT

CLICK HERE TO CONFIRM THE PRICE
MSRP $22.00
Sale Price $11.00
50% OFF Factory Direct Saving
SKU#
discount-32-250-125-975
In stock
32-250-125-975
  • Micron Rating: 5 micron
  • Exact Dimensions: 10" length x 4.25" diameter (Full Flow)
  • Gallons Per Minute: About 1-3 GPM flow rate depending on specific filter system
  • High Adsorptive Capacity and Efficiency
  • NSF and WQA certification for Material Safety
  • High Dirt Holding Capacity
  • Filter Media: Carbon block (activated carbon particles fused into a uniform block) with sediment prefilter
  • Filter Life: Approx. 6 months depending on usage patterns and local water quality - filter should be replaced when a major reduction in flow is noticed
Matrikx CTO carbon filter part number 32-250-125-975 removes chlorine, taste and odor, and organic chemicals that contribute to bad taste and odor. Filter also provides dirt holding capacity of a 5-micron sediment filter. CTO Chlorine, Taste and Odor removal filters work great where both carbon and sediment filters are needed. Offers exceptional cost to performance value. The carbon extrusion manufacturing process allows the production of carbon block with more carbon, and lower pressure drop.
More Information
Model #32-250-125-975
ManufacturerAqua Science
Write Your Own Review
You're reviewing:KX Matrikx CTO Carbon Filter 10x2.5" CLOSEOUT
Your Rating
What is the micron rating of this filter?
The KX Matrikx CTO Carbon Filter has a 5-micron rating.
What contaminants does this filter remove?
It removes chlorine, taste, odor, and organic chemicals.
How often should the filter be replaced?
The filter should be replaced approximately every 6 months or when a significant reduction in flow is noticed.
What is the flow rate of this filter?
The flow rate is about 1-3 gallons per minute, depending on the specific filter system.
Is this filter certified for material safety?
Yes, it has NSF and WQA certification for material safety.
What are the exact dimensions of the filter?
The filter measures 10 inches in length and 4.25 inches in diameter.
Does this filter require a control box?
No, a control box is not needed for this filter.

Installation Brief

Installing the KX Matrikx CTO Carbon Filter is straightforward and enhances water quality by removing unwanted contaminants.

  1. Turn off the water supply to the filter system.
  2. Release any pressure in the system by opening a downstream faucet.
  3. Remove the housing using a filter wrench.
  4. Take out the old filter and insert the new KX Matrikx CTO Carbon Filter.
  5. Reattach the housing and tighten securely.
  6. Turn the water supply back on and check for leaks.
Important:
  • Ensure the water supply is turned off before installation.
  • Check for leaks after installation.
  • Consult a professional if unsure about installation procedures.
KX Matrikx CTO Carbon Filter 10x2.5" CLOSEOUTKX Matrikx CTO Carbon Filter 10x2.5" CLOSEOUT